Showing posts with label Chevrolet. Show all posts
Showing posts with label Chevrolet. Show all posts

Sunday, March 20, 2011

Chevrolet Impala Super Sport, 1966

Chevrolet Impala Super Sport, 1966

 

The Impala was introduced in 1958 as a new up-level, sporty trim package created for Bel Air coupes and convertibles. Unique to the model were its six taillights, which set it apart from lower trim levels with only two lights on a side. This classic styling cue would become its trademark. It was named for a southern African antelope. The Impala became a separate model in 1959 in both two and four-door versions and became the best selling car in the Chevy product line. For 1960, it became the best-selling automobile in the United States and held that position for the next decade. From 1958 until 1996, Impala sales were in excess of 13 million units, more than any other full-size car in the history of the automobile. In 1965, the Impala set an all-time industry annual sales record of more than 1 million units, which has never been bettered.

In 1965, Chevrolet introduced the Impala Caprice. Beginning with the four-door hardtop sedan body, Impala Caprices received unique upholstery, wood grained accents on the dash board and specialty pulls on the insides of the doors. A one year model, the Impala Caprice was reintroduced as the Chevrolet Caprice in 1966, taking the top position in the Chevrolet lineup. The Impala however, remained Chevrolet's top-selling model until late 1970s. During the 1969 model year, for example, Impala production topped Caprice production by 611,000 units.

The 1971 redesign introduced the largest Impala. The Impala's chassis would not be this extensively changed again until the introduction of the 2000 Impala. The Impala would remain Chevrolet's best-selling model until 1977.

The Impala is often credited with starting the muscle car era, although the credit for that really goes to Pontiac when it released the GTO. In the 1960s, gasoline was cheap and consumer demand for power exceeded the need for efficiency. Buyers were clamoring for as much room, performance, amenities and quality as they could get for their dollars. Afraid it would lose out to an in house competition, Chevy released its muscle car, the SS, soon after. In 1961, the Impala SS (Super Sport) was introduced to the market. The SS badge was to become Chevrolet's signature of performance on many models, though it has often been an appearance package only. The Impala's SS package in 1961 was truly a performance package, beginning with the high-performance 348 in³ (5.7 L) engines (available with 305, 340, and 350 hp (230, 255 and 260 kW)) or the new 409 in³ (6.7 L), which was available with up to 425 hp. The package also inclued upgraded tires on station wagon wheels, springs, shocks and special sintered metallic brake linings. Starting in 1962, the Impala SS could be had with any engine available in the Impala, right down to the 235 in³ 135 hp inline-6. With one exception, from this point until 1969, the SS was an appearance package only, though the heavy-duty parts and big engines could still be ordered.

The exception was the Z24 option package available in combination with the standard Z03 Super Sport package. Starting in 1967, through 1969, buyers of Z24s Impalas got cars badged as "SS427" models. The SS427 included heavy duty suspension and other performance goodies, as well as a Turbo-Jet 427 in either L36 or L72 variations. Special SS427 badging inside and out were the rule, but few were sold, since "muscle car" enthusiasts were looking toward big-block intermediates like the Chevelle SS396 and Plymouth Hemi Roadrunners, which were lighter and subsequently faster off the line. Interestingly, Z24 cars could be ordered without the Z03 SS package, which meant SS427 equipment but no bucket seats or center console.

The Impala SS could be identified by SS emblems on the rear fenders and trunk lid. The Impala SS became its own series (separate model rather than an option package) for 1964. In 1968, the Impala SS once more became an option package rather than having its own model. In 1969, the Impala SS was only available as the Z24 (SS427), coming only with a 427 in³V8 of 390 or 425 hp. This was the final year for the Impala SS until 1994.

Wednesday, February 16, 2011

Chevrolet Corvette C2, 1963

Chevrolet Corvette C2, 1963


 


The Chevrolet Corvette C2 is a sports car designed by Larry Shinoda under the styling direction of Bill Mitchell, and produced between 1963 and 1967. It is the second generation or mid-year Chevrolet Corvette built and marketed by Chevrolet.

1963 would see the introduction of the new Corvette Sting Ray coupé with its distinctive split rear window and fake hood vents as well as an independent rear suspension. The split rear window was discontinued in 1964 due to safety concerns. Because they made the design too busy, the hood vents were also cut. Power for 1963 was at 365 hp (272 kW) hitting 375 hp (280 kW) in 1964.

4-wheel disc brakes were introduced in 1965, as was a "big-block" engine option (the 396 in³ (6.5 L) V8). Side exhaust pipes appeared on the 1965 Stingray and persisted through 1969. Chevrolet would up the ante in 1966 with the introduction of an even larger 427 in³ (7 L) version, creating what would be one of the most collectible Corvettes ever. 1967 saw a L88 version of the 427 introduced which was rated at 430 hp (321 kW), but unofficial estimates place the actual output at 550 hp (410 kW) or more. Only twenty such engines were placed in the 1967 Corvette, and the cars can fetch US$600,000 or more in auction today. From 1967-1969, the 1282 cfm Holley triple two-barrel carbuetor, or Tri-Power, was available on the 427. The 1967 Corvette originally was going to be the first of the C3 generation; however, due to delays the C3 had to be put off until 1968. Other early options available on the C2 included AM-FM radio (mid 1963), air conditioning (1963), telescopic wheel (1965), head rests, presumably to prevent whiplash (1966).

The 1965 introduction of the 425HP 396 c.i. big block was ultimately the harbinger of doom for the Rochester Fuel injection system. The 396 425HP option cost $145. The 327-370HP Fuelie option cost $500. Few people could justify spending $355 more, for 55 hp less. When less than a thousand fuelie cars were built in 1965, Chevy stopped the program. It was indeed short sighted. Chevy was way ahead of its time and had they continued every car that says Lucas or Bosch Fuel injection now, may have said Rochester. As of this writing GM does not make any carburated cars.

In 2004, Sports Car International named the Stingray number five on the list of Top Sports Cars of the 1960s.
The design of this generation had several inspirations. The first was the contemporary Jaguar E-Type, of which Mitchell owned one and enjoyed driving it frequently. Bill Mitchell also sponsored a car known as the "Mitchell Sting Ray" in 1959, because Chevrolet no longer participated in factory racing. This vehicle had the largest impact on the styling of this generation, although it had no top and didn't give away what the coupe would look like. The third inspiration was a mako shark that Mitchell caught while deep-sea fishing.

Chevrolet Stingray Racer Concept, 1959

Chevrolet Stingray Racer Concept, 1959




Chevrolet Stingray Racer Concept, 1959

Chevrolet Corvette Mako Shark Concept, 1961

Chevrolet Corvette Mako Shark Concept, 1961


The XP-755 Mako Shark show car was designed by Larry Shinoda under the direction of GM Design head Bill Mitchell in 1961, as a concept for future Chevrolet Corvettes. In keeping with the name, the streamlining, pointed snout, and other detailing was partly inspired by the look of that very fast fish. The "Mako Shark" was very similar to the 1963 Corvette, with some alterations. These included adding two more brake lights in the rear (six total), making the nose of the car longer and more pointed, creating a clear glass roof with a periscope-like rear-view mirror, and remodeling the interior.

A widespread story has it that Mitchell had an actual shortfin mako shark mounted on the wall in his office, and ordered his team to paint the car to match the distinctive blue-gray upper surface gently blending into white underside of the fish. After numerous attempts to match the fish's color scheme failed, the team hit upon the idea of kidnapping the fish one night, painting it to match their best efforts on the car, and returning it to the office. Mitchell never realized the difference and pronounced himself pleased with the team's duplication on the car of nature's handiwork.

Tuesday, January 4, 2011

Chevrolet Nomad, 1957

Chevrolet Nomad, 1957

 

The Chevrolet Nomad was a station wagon produced by the Chevrolet Motor Division of the General Motors Corporation from 1955 to 1961. The Nomad is best remembered as a two-door station wagon and is commonly associated with the "surf culture" of the late 1950s and early 1960s. The Nomad was considered Chevrolet's halo model during its three-year production as a two-door station wagon.

1955-1957
The two-door Nomad differed from other station wagons of the era by having unique styling more reminiscent of a hardtop than of a standard station wagon. Chevrolet shared this body with its sister Pontiac, which marketed their version as the Pontiac Safari.

The Nomad's unique design had its roots in a General Motors Motorama show car of the same name that was based on the Corvette. GM approved production of the vehicle if the design could be transferred to its full-size models, because top GM brass felt that they could sell more models if it were attached to the popular Bel Air model.

While considered to be a milestone vehicle design, General Motors discontinued the original Nomad at the end of the 1957 model year to focus attention on its upcoming new halo vehicles like the Chevrolet Impala.

Chevrolet Nomad, 1954

Chevrolet Nomad, 1954


The Chevrolet Nomad was a station wagon produced by the Chevrolet Motor Division of the General Motors Corporation from 1955 to 1961. The Nomad is best remembered as a two-door station wagon and is commonly associated with the "surf culture" of the late 1950s and early 1960s. The Nomad was considered Chevrolet's halo model during its three-year production as a two-door station wagon.

1955-1957
The two-door Nomad differed from other station wagons of the era by having unique styling more reminiscent of a hardtop than of a standard station wagon. Chevrolet shared this body with its sister Pontiac, which marketed their version as the Pontiac Safari.

The Nomad's unique design had its roots in a General Motors Motorama show car of the same name that was based on the Corvette. GM approved production of the vehicle if the design could be transferred to its full-size models, because top GM brass felt that they could sell more models if it were attached to the popular Bel Air model.
While considered to be a milestone vehicle design, General Motors discontinued the original Nomad at the end of the 1957 model year to focus attention on its upcoming new halo vehicles like the Chevrolet Impala.

1958-1961
For the 1958 model year, Chevrolet applied the Nomad name to its traditional top-line four-door station wagon.

In 1959, the Nomad was transferred to the expanded Impala model range, which had replaced the Bel Air as the top-line Chevrolet. Chevrolet continued to use the Nomad name until the end of the 1961 model year, when all Chevrolet station wagons adopted their parent model name.

1964 through 1980's
The Nomad returned again in 1964 and 1965 as a two-door Chevelle station wagon, and spent the rest of the 1960's as a low-level Chevelle station wagon. In the 1970's and early-1980's it was even offered as a G-Series full-size van model.

Chevrolet Corvette C1, 1953

Chevrolet Corvette C1, 1953

 
 

The Chevrolet Corvette C1 is a sporty automobile produced from 1953 through 1962. It is the first generation of Chevrolet Corvettes built and marketed by Chevrolet.

Design
While the style of a car may be just as important to some as to how well the car runs, automobile manufacturers did not begin to pay attention to car designs until the 1920s. It was not until 1927, when General Motors hired designer Harley Earl, that automotive styling and design became important to American automobile manufacturers. What Henry Ford did for automobile manufacturing principles, Harley Earl did for car design. Most of GM's flamboyant "dream car" designs of the 1950s are directly attributable to Earl, leading one journalist to comment that the designs were "the American psyche made visible." Harley Earl loved sports cars, and GIs returning after serving overseas World War II were bringing home MGs, Jaguars, Alfa Romeos and the like. Earl convinced GM that they needed to build a two-seat sports car. The result was the 1953 Corvette, unveiled to the public at that year's Motorama car show. The original Corvette emblem incorporated an American flag into the design; this was later dropped, since associating the flag with a product was frowned upon.

Taking its name from the corvette, a small, maneuverable fighting frigate (the credit for the naming goes to Myron Scott), the first Corvettes were virtually handbuilt in Flint, Michigan in Chevrolet's Customer Delivery Center, now an academic building at Kettering University. The outer body was made out of a revolutionary new composite material called fiberglass, selected in part because of steel quotas left over from the war. Underneath that radical new body were standard Chevrolet components, including the "Blue Flame" inline six-cylinder truck engine, two-speed Powerglide automatic transmission, and drum brakes from Chevrolet's regular car line. Though the engine's output was increased somewhat, thanks to a triple-carburetor intake exclusive to the Corvette, performance of the car was decidedly lackluster. Compared to the British and Italian sports cars of the day, the Corvette was underpowered, required a great deal of effort as well as clear roadway to bring to a stop, and even lacked a "proper" manual transmission. Up until that time, the Chevrolet division was GM's entry-level marque, known for excellent but no-nonsense cars. Nowhere was that more evident than in the Corvette. A Paxton supercharger became available in 1954 as a dealer-installed option, greatly improving the Corvette's straight-line performance, but sales continued to decline.
Chevrolet Corvette C1

GM was seriously considering shelving the project, leaving the Corvette to be little more than a footnote in automotive history, and would have done so if not for two important events. The first was the introduction in 1955 of Chevrolet's first V8 engine (a 265 in³ {4.3 L}) since 1919, and the second was the influence of a Soviet emigre in GM's engineering department, Zora Arkus-Duntov. Arkus-Duntov simply took the new V8 and backed it with a three-speed manual transmission. That modification, probably the single most important in the car's history, helped turn the Corvette from a two-seat curiosity into a genuine performer. It also earned Arkus-Duntov the rather inaccurate nickname "Father of the Corvette".

The first generation is commonly referred to as a solid-axle, based on the fact that independent rear suspension (IRS) was not available until 1963.

Fuel injection
The first generation started in 1953 and ended in 1962, with the noteworthy addition of optional fuel injection in 1957. This new induction system first saw regular use on a gasoline engine two years prior on the Mercedes-Benz 300SL "Gullwing" roadster. Although the Corvette's GM-Rochester fuel injection system used a constant flow style fuel injection system as opposed to the diesel style nozzle metering system of the Mercedes' six cylinders, the system nevertheless produced about 290HP. The number was derated by Chevrolet's advertising agency for the 283HP/283 in³ (4.6 L) one hp per in³ slogan, making it one of the first mass-produced engines in history to reach 1 hp/in³. In 1962, the GM Small-Block was enlarged to 327 in³ (5.4 L) and produced a maximum of 360 hp (268 kW). Other early options included Power windows (1956), hydraulically operated power convertible top (1956), four speed manual transmission (mid 1957), and heavy duty brake and suspension options (1957).

Chevrolet Pick-Up, 1949

Chevrolet Pick-Up, 1949


Chevrolet Pick-Up, 1949

Chevrolet Truck Classic V-8, 1949

Chevrolet Truck Classic V-8, 1949


Chevrolet Truck Classic V-8, 1949

Sunday, December 12, 2010

Chevrolet Depot Hack, 1948

Chevrolet Depot Hack, 1948



Chevrolet Depot Hack, 1948

Chevrolet 4x4 Pickup, 1948

Chevrolet 4x4 Pickup, 1948


1948 Chevrolet 4x4 Pickup

Chevrolet Deluxe, 1947

Chevrolet Deluxe, 1947


Chevrolet Deluxe, 1947

Tuesday, November 2, 2010

Chevrolet Prenston Gale 1931

Chevrolet Prenston Gale 1931
Click the picture to enlarge >>

Chevrolet Prenston Gale 1931

Chevrolet 4DR, 1928

Chevrolet 4DR, 1928
Click the picture to enlarge >>

Chevrolet 4DR, 1928